Tencan 1.5KW 300 KGS/Hour Corundum Double Roller Crusher For Ore Limestone Coal
|Place of Origin:||Hunan, China|
|Model Number:||Corundum Double-roll Crusher|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Packaging Details:||Plywood case with foam|
|Delivery Time:||15-25 working days after getting full payment.|
|Payment Terms:||T/T, Western Union|
|Supply Ability:||200 sets per month|
|Product Bane:||Lab Crusher||Model No.:||Corundum Double Roll Crusher|
|Power:||1.5KW||Output Size:||Lesss Than 3mm|
Double Roller Crusher 1.5KW,
Corundum Double Roller Crusher,
300 KGS/Hour Powder Crusher Machine
China Tencan 1.5KW 300 KGS/Hour Corundum Double Roller Crusher For Ore Limestone Coal
Overview of Lab Double-Roller Crusher
Lab Double-roll Crusher is mainly applied to crushing all kinds of materials, which are less than comprehensive strength limit of 2000kgs per square centimeter, such as ore, limestone, coal gangue, slag, carbon block in the industry of refractory material, chemical, coal, building material and so on.
Working Principle of Lab Jaw Crusher
2.Adjusting of output granularity: there is a wedge or gasket adjusting device between the two rollers. Wedge adjusting device:there is a adjusting bolt on the top of the Wedge device. When the wedge is pulled up by adjusting bolt, the wedge pushes the movable roller away from the fixed roller. That is to say, when the gap of the two rollers becomes wide, output granularity shall become larger accordingly. When the wedge falls down, the gap of the two rollers becomes small under pressure of the spring, output granularity becomes small. Gasket adjusting devices: it is used to adjust output granularity by means of increasing or decreasing numbers or thickness of the gasket. When adding gaskets, the gap of the two rollers becomes wide,and output granularity becomes large, when decreasing gasket, gap of the two rollers becomes small, and output shall be fine accordingly.
3.There are two motors which drive the rollers by V-belt. Both rollers rotate in opposite direction.
4.When materials are being crushed, the feed material are in put from the inlet and crushed by the rollers, and finally the crushed products are out put from the chassis below .
5.For security, transmission security cover should be installed according to the actual situation.
Applications of Lab Double-Roller Crusher
Jaw Crusher is mainly used for crushing large bulk mineral materials into small pieces so as to finely grind by ball mill. It is widely used to crush all kinds of ores and bulk material. The equipment mainly applied to crush materials in rough, medium and fine scale such as ore limestone, calcium carbides, carbide slag, shale, basalt, river gravel, blue stone etc.
Features of Lab Jaw Crusher
1.Long service life, no easy to damage
2.Compact structure,light weight and small size
3.Simple structure, small footprint, easy to operation and maintenance
4.Reasonable structure low running cost, smooth operation, energy-efficient, high crushing efficiency
5.Dust board installed inside,good sealing performance, avoid splashing of crushed fine material
6.The particle size is adjustable, after tune of the roll gap, the broken particle size can be reliably controlled according, and all the granularity will be discharge in the ideal size.
Technical Parameters of Lab Jaw Crusher
|Parameter of Double-Roll Cruhser|
|Material of Roller||Stainless Steel||Corundum(alumina ceramic)||