Payment & Shipping Terms:
|Product Name:||Full Directional Planetary Ball Mill||Model No.:||QXQM-10|
|Total Volume:||10 Liter||Rotate Speed:||70-580 Rpm|
|Speed Control:||Frequency Control||Voltage:||220V-50Hz|
QXQM-10 TENCAN 10L Lab Grinding Ultra fine powder prepare Full Directional Planetary Ball Mill Machine
QXQM series planetary ball mill has four ball grinding tanks installed on one disc. When the turn disc rotates, the mill pots revolve on their own axis and make 360 degree rotation. And the balls in the tanks grind and mix samples in high speed movement. The product can smash and blend various products of different materials and granularity with dry or wet methods. Minimum granularity of ground samples can be as small as 0.1 micron meter. It is widely used in the fields of Geology, Mining, Metallurgy, Electronics, Construction Material, Ceramics, Chemical Engineering, Light Industry Medicine, Environmental Protection etc.
Planetary disk turnover rolling
Motor for turnover rolling can be controlled for stop and lock. 360 degrees turnover makes grinding jars rotating in multiply directions without any dead angle.
Distinct designed gear with good stability and lower noise
Distinct gear with noise of 15-20db less than that of the same model
Elegant process and fine workmanship
500 thousand high-end mold molding, 3 million precision machine manuafacturing, exquisite and durable.
The main fileds of Application for planetary ball mill are
to name just a few.
Planetary ball mills are available in versions with 2 or 4 grinding stations. The freely selectable machine settings, comprehensive range of grinding jars made from top-quality materials as well as the numerous possible balls charge combinations(number and ball size) allow individual adaption of the grinding parameters to the particular size reduction task.
Guidelines for sample amount and ball charge
As a rule of thumb, the grinding balls should be approximately 3 x larger than the largest sample particle. In addition to the instrument settings and the ball size, the filling level of the jar is also of crucial importance for a successful grinding process in ball mills.
When grinding bulk materials, the jar should be filled with approx. 1/3 sample and 1/3 ball charge. The remaining third is the free jar volume that is necessary for the free movement of the balls.
If an increase or decrease in sample volume is to be expected during the grinding process, the filling levels may be changed according to the range give in the table below (in case of an expected decrease in sample volume, a further deviation is possible).
For wet grinding with grinding balls <3mm the ball charge should make up 60% of the jar volume, while the sample amount should be 30%, Then density of the grinding ball materials is used to calculate the mass of the required amount of grinding balls.
*Please note: The maximum recommended speed should be considered when using those grinding ball sizes, please refer to the operating manual for further information.
Technical Datas of Best price Small Lab Planetary Ball Mill with output 0.1 micron:
|Working Principle||impact and friction force|
|Compatible Non Vacuum Grinding Jars||(50ml~2500ml) * 4|
|Compatible Vacuum Grinding Jars||2500ml *4 grinding jars|
|Operation Mode||2 or 4 grinding jars working simultaneously|
|Feeding Granularity||Soil materials < 10mm, others materials < 3mm|
|Discharging Granularity||down to 0.1μm|
|Sample Type||hard, medium-hard, soft, fibrous, brittle, moist|
|Rotational Speed of Grinding Jar||580rpm|
|Rotational Speed Ratio (planetary disk/jar)||1 : -2|
|Drive Mode||gear drive and belt drive|
|Speed Control||stepless speed regulation|
|Electrical Details||220VAC, 50Hz, 1.5kW,|
|Max Continuous Grinding Time (full-load)||72hours|
|Weight (Net /Gross)||420KG /530KG|
Please note: for this TENCAN ball mill, you require two or four grinding jars of your choice and the corresponding number of grinding balls. The grinding jar material must be harder than the material to be ground. In normal cases, grinding jars and balls of the same material are used. To shorten the grinding time, larger or heavier grinding jars and grinding balls with a higher density can be used.
|Main Parameters of 10L 110 - 220v Full directional Laboratory Planetary Ball Mill|
|Alternating Run Time of Forward & Reversal Rotation
Accessories of Mill Jars & Balls
Available Mill Jars:
304 stainless steel mill jar, 316 stainless steel mill jar, tungsten carbide mill jar, agate mill jar, alumina ceramic mill jar(also called corundum mill jar), zirconia mill jar, nylon mill jar, polyurethane mill jar, Teflon mill jar (PTFE), and etc.
Available Mill Balls:
304 stainless steel mill balls, 316 stainless steel mill balls, tungsten carbide mill balls, agate mill balls, alumina balls, zirconia mill balls, and etc.
Contact Person: admin