40 Rpm 80L Planetary Ball Mill Machine , Three Phase Horizontal Ball Mill
|Place of Origin:||Hunan, China|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 set|
|Delivery Time:||10-30 work days|
|Payment Terms:||T/T, Western Union, MoneyGram|
|Supply Ability:||20 sets per month|
|Product Name:||Vertical Planetary Ball Mill||Model No.:||XQM-80(C)|
|Total Volume:||80 Liter||Rotate Speed:||40-210 Rpm|
|Speed Control:||Frequency Control||Voltage:||Three Phase 380V-50Hz|
planetary milling machine
XQM-80(C) TENCAN Hot Selling 80L big planetary ball mill with lifting device and air cooling system
Ideal for wet or dry grinding application
Automatic and programmable control with LED display
multiple grinding modes to choose
High Uniformity and excellent repeatability
Four samples with different sizes and materials in one experiment
Cooling of the grinding chamber with a built-in fan for long grinding times
Experiment on the following requirements of the Cooling Air circulating Planetary Ball Mill:
1.The temperature needed to be lower than 50 ℃ during the grinding of biological samples.
2.The powder will be caked in the process of ultrafine grinding.
3.In some experiments, the temperature should not be higher than 30 ℃.
4.The powder will expand during high temperature grinding, which will lead to explosion experiment
Summary: the circulating cold air ball mill mainly solves some problems caused by high temperature and chemical reaction in powder grinding process, and controls the temperature of grinding process so as to obtain more perfect experimental samples.
The main fileds of Application for planetary ball mill are
- Biology and Biotechnology
- Ceramics and Glass
- Construction Materials
- Environmental Research
- Mineralogy and Metallurgy
to name just a few.
Planetary ball mills are available in versions with 2 or 4 grinding stations. The freely selectable machine settings, comprehensive range of grinding jars made from top-quality materials as well as the numerous possible balls charge combinations(number and ball size) allow individual adaption of the grinding parameters to the particular size reduction task.
Guidelines for sample amount and ball charge
As a rule of thumb, the grinding balls should be approximately 3 x larger than the largest sample particle. In addition to the instrument settings and the ball size, the filling level of the jar is also of crucial importance for a successful grinding process in ball mills.
When grinding bulk materials, the jar should be filled with approx. 1/3 sample and 1/3 ball charge. The remaining third is the free jar volume that is necessary for the free movement of the balls.
If an increase or decrease in sample volume is to be expected during the grinding process, the filling levels may be changed according to the range give in the table below (in case of an expected decrease in sample volume, a further deviation is possible).
For wet grinding with grinding balls <3mm the ball charge should make up 60% of the jar volume, while the sample amount should be 30%, Then density of the grinding ball materials is used to calculate the mass of the required amount of grinding balls.
*Please note: The maximum recommended speed should be considered when using those grinding ball sizes, please refer to the operating manual for further information.
Technical Datas of Best price big model Planetary Ball Mill with output less than 0.1 micron:
|Working Principle||impact and friction force|
|Compatible Non Vacuum Grinding Jars||20liter x 4|
|Compatible Vacuum Grinding Jars||20 liter *4 grinding jars|
|Operation Mode||2 or 4 grinding jars working simultaneously|
|Feeding Granularity||Soil materials < 10mm, others materials < 3mm|
|Discharging Granularity||down to 0.1μm|
|Sample Type||hard, medium-hard, soft, fibrous, brittle, moist|
|Rotational Speed of Grinding Jar||240rpm|
|Rotational Speed Ratio (planetary disk/jar)||1 : -1.5|
|Drive Mode||gear drive and belt drive|
|Speed Control||stepless speed regulation|
|Electrical Details||380C, 50Hz, 11kW,|
|Max Continuous Grinding Time (full-load)||72hours|
|Weight (Net /Gross)||850KG /960KG|
Please note: for this TENCAN ball mill, you require two or four grinding jars of your choice and the corresponding number of grinding balls. The grinding jar material must be harder than the material to be ground. In normal cases, grinding jars and balls of the same material are used. To shorten the grinding time, larger or heavier grinding jars and grinding balls with a higher density can be used.
|Main Parameters of 20L 380V Air cooled Planetary Ball Mill|
|Alternating Run Time of Forward & Reversal Rotation
Accessories of Mill Jars & Balls
Available Mill Jars:
304 stainless steel mill jar, 316 stainless steel mill jar, tungsten carbide mill jar, agate mill jar, alumina ceramic mill jar(also called corundum mill jar), zirconia mill jar, nylon mill jar, polyurethane mill jar, Teflon mill jar (PTFE), and etc.
Available Mill Balls:
304 stainless steel mill balls, 316 stainless steel mill balls, tungsten carbide mill balls, agate mill balls, alumina balls, zirconia mill balls, and etc.